A 1-minute script is about 130 to 150 words when it is read at a relaxed, conversational pace. A slow, deliberate read fits 110 to 120 words in a minute, and a fast, energetic one fits 160 to 180. If you need one planning number, write 140 words per minute of video or speech, then time yourself reading it aloud, because your own pace beats any average.
The formula behind every number on this page is one line: words = minutes × words per minute. Run it backwards to time a script you already have: minutes = words ÷ words per minute. A 700-word script read at 140 words per minute runs 5 minutes.
Where the 130 to 150 figure comes from
There is no single correct speaking rate, and the pages that give you one exact number are guessing. What the research does give is a range. The National Center for Voice and Speech puts the average rate for English speakers in the United States at about 150 words per minute. That is the figure most "words to minutes" calculators start from.
Measured conversation varies far more than that average suggests. In a University of Pennsylvania study of 2,438 recorded phone conversations, Yuan, Liberman and Cieri found an overall rate of 196 words per minute, with single conversations ranging from 111 to 291. People chatting with friends and family spoke faster (about 214 words per minute) than strangers did (about 193).
A script read to a camera or an audience usually lands slower than casual talk. You pause for emphasis, you articulate, and you are reading. That is why most scripting guides we read cluster around 130 to 150, and why the table below treats that band as "conversational" for scripted delivery.
Script word count for every length, 15 seconds to 20 minutes
Find your length in the left column, then read across to your pace. If you do not know your pace yet, use the conversational column and check it with the 60-second test further down.
Scroll sideways to compare every column.
Words that fit each length at three speaking paces (words = minutes × wpm, rounded). The last column is a single planning number at 140 wpm.
| Length | Slow (110–120 wpm) | Conversational (130–150 wpm) | Fast (160–180 wpm) | Plan for |
|---|---|---|---|---|
| 15 seconds | 28–30 | 33–38 | 40–45 | 35 |
| 30 seconds | 55–60 | 65–75 | 80–90 | 70 |
| 45 seconds | 83–90 | 98–113 | 120–135 | 105 |
| 60 seconds | 110–120 | 130–150 | 160–180 | 140 |
| 90 seconds | 165–180 | 195–225 | 240–270 | 210 |
| 2 minutes | 220–240 | 260–300 | 320–360 | 280 |
| 3 minutes | 330–360 | 390–450 | 480–540 | 420 |
| 5 minutes | 550–600 | 650–750 | 800–900 | 700 |
| 7 minutes | 770–840 | 910–1,050 | 1,120–1,260 | 980 |
| 10 minutes | 1,100–1,200 | 1,300–1,500 | 1,600–1,800 | 1,400 |
| 15 minutes | 1,650–1,800 | 1,950–2,250 | 2,400–2,700 | 2,100 |
| 20 minutes | 2,200–2,400 | 2,600–3,000 | 3,200–3,600 | 2,800 |
So a 30-second script is about 65 to 75 words, a 5-minute speech is about 650 to 750 words, and a 10-minute YouTube script is about 1,300 to 1,500 words. Fast talkers can stretch those, but every extra word costs the listener a little comprehension.
Words to minutes: how long your draft will run
If you already have a draft, check the word count in your editor and look it up here.
Scroll sideways to compare every column.
Approximate runtime (minutes:seconds) of a script by word count. Minutes = words ÷ wpm.
| Words | At 120 wpm | At 140 wpm | At 160 wpm |
|---|---|---|---|
| 100 | 0:50 | 0:43 | 0:38 |
| 250 | 2:05 | 1:47 | 1:34 |
| 500 | 4:10 | 3:34 | 3:08 |
| 750 | 6:15 | 5:21 | 4:41 |
| 1,000 | 8:20 | 7:09 | 6:15 |
| 1,500 | 12:30 | 10:43 | 9:22 |
| 2,000 | 16:40 | 14:17 | 12:30 |
| 3,000 | 25:00 | 21:26 | 18:45 |
Speech vs video vs ad read vs audiobook
The same minute holds different word counts depending on the format, because each format has its own pace and its own share of silence. These are the best published figures we could verify.
Scroll sideways to compare every column.
Typical pace by format, from the source named in each row.
| Format | Typical pace | Words per minute of runtime | Source |
|---|---|---|---|
| Casual conversation | Fast | About 190–215 | Yuan et al. 2006 |
| Speech or presentation | Average | About 150 | NCVS |
| Talking-head video | Brisk | Average 169 (range 128–203) in one sample | Biteable |
| Audio ad (Spotify) | Room for music and pauses | 65 per 30 s, 100 per 60 s | Spotify Advertising |
| Audiobook narration | Steady | About 155 (9,300 per hour) | ACX |
- Speeches and talks: a live audience needs pauses for laughs, applause and slides. Write to 130 to 140 words a minute even if you speak faster in rehearsal. Polished talks tend to run quicker than lectures: a 2017 study of TED talks found their speech rate significantly faster than university lectures.
- YouTube and social video: creators often speak faster than presenters, and jump cuts remove the breaths. Biteable measured 100 YouTube videos by one narrator and found an average of 169 words per minute. That is one narrator, so treat it as the upper end of normal for video.
- Ad reads: ads leave space for a logo sting, music and a call to action. Spotify recommends no more than 65 words for a 30-second audio ad and 100 words for a 60-second ad, which is well under the conversational column.
- Audiobooks: ACX, Audible's production marketplace, estimates that most narrators read about 9,300 words per finished hour, which works out to about 155 words a minute.
Sources for this section: Yuan, Liberman and Cieri (2006), NCVS, Wingrove (2017) on TED talks, Biteable's video word count research, Spotify audio ad specs and ACX on audiobook length.
What makes a script run longer than its word count
Word count is a proxy for time. Four things push the real runtime past what the table predicts, and the ranking pages rarely mention them.
- Numbers, dates and links. "2027" is one word on the page and three when spoken ("twenty twenty-seven"). A web address or a price like "$1,499" can be five or six spoken words.
- Long words. A three-syllable word takes longer to say than a one-syllable word, so a script full of technical terms runs slower in words per minute than one in plain language.
- Planned pauses. A two-second pause after each key point adds up to about 30 seconds in a 5-minute talk.
- Things that are not you talking. B-roll, a product demo, an intro sting or audience laughter all take runtime with zero script words.
How to measure your own speaking pace in 60 seconds
Every number above is an average across other people. Your pace is the one that decides whether your 3-minute script lands at 3 minutes. Measuring it takes one minute.
- Pick a passage of about 250 words that you have not memorized. Your own script is best, because your vocabulary changes your pace.
- Set a 60-second timer and read aloud in the voice you will actually use: to camera, to a room, or into a microphone. Read out loud; silent reading runs faster than speech and will overstate your pace.
- Stop when the timer ends and mark the last word you said.
- Count the words you read. That number is your words per minute.
- Repeat twice and average the three results.
A faster check is to record a take, note its length, and divide the script's word count by the minutes. A 420-word script that takes 2 minutes 50 seconds gives 420 ÷ 2.83, or about 148 words per minute.
Set your pace once, see the runtime on every script
We make Zen Teleprompter, and we built this part of it because doing the division by hand for every draft gets old. Each script shows its word count and an estimated runtime, and you set the speaking pace that estimate assumes in words per minute. Once your measured pace is in, the runtime on every script reflects how you actually read.


The script library shows the runtime next to every title, so you can see at a glance which drafts fit their slot before you record anything. During the read, an optional session timer shows elapsed time or time left on the prompter screen.

The formula works anywhere, but it goes stale the moment you edit. The app earns its place when you rewrite a script several times and want the runtime to update as you go, then read it from the prompter and record the take in the same place. Zen Teleprompter is for iPhone and iPad, free to download with up to five active scripts; free recording exports carry a small app badge.
How to cut a script that runs long
First, work out the overage in words. Say you have a 5-minute slot, an 820-word draft and a measured pace of 140 words per minute. The draft runs about 5 minutes 51 seconds, and the slot fits about 700 words, so you need to cut roughly 120 words. Knowing the number keeps you from trimming a few adjectives and hoping.
- Cut whole sections before sentences. If one example or story can go, it usually removes the 100 words you need in one move and keeps the rhythm of what stays.
- Delete the warm-up. Openings like "Hi everyone, so today I want to talk about" spend 10 to 15 seconds before the point. Start with the point.
- Trim lists to the strongest item. Three examples of the same idea rarely persuade more than one good one.
- Round numbers for the ear. "Almost half" is quicker to say and easier to remember than "forty-seven point three percent".
- Remove hedges and fillers: "I think", "basically", "really", "kind of". They add words and weaken the line.
- Read the cut version aloud and time it again. Cuts often reveal a sentence that no longer connects, and fixing it adds a few words back.

Quick answers by use
- 1-minute video or speech: 130 to 150 words. Write 140.
- 30-second ad, intro or elevator pitch: 65 to 75 words spoken; 65 or fewer for an audio ad with music.
- 60-second Reel, Short or TikTok: 130 to 150 words, fewer if you plan on-screen text or B-roll.
- 5-minute speech: 650 to 750 words. Allow for pauses and applause.
- 10-minute YouTube video: 1,300 to 1,500 words of script, less if a demo or B-roll carries part of it.
- 20-minute talk: 2,600 to 3,000 words. Aim lower if you want room to respond to the audience.
If you are writing a conference talk or keynote, our page for speakers covers running the script from an iPad with the runtime in view. For channel work, see Zen Teleprompter for YouTube creators and the step-by-step guide to recording a YouTube video with an iPhone teleprompter. If you are choosing an app, we compared eight in the best teleprompter apps for iPhone and iPad, including the ones we do not make.


